Waterfront premises measurement standard

The measurement of the Usable Area of ​​the Premises was made in accordance with the applicable regulations governing the principles of its measurement and the principles of maintaining land and mortgage registers, documenting entries and marking real estate in land and mortgage registers, in particular based on the following principles:

  1. The measurement is made at floor height within the walls finished with plaster;
  2. The measurement results are rounded to 0.01 m (one hundredth of a meter);
  3. The measurement covers all walls of the premises (external and internal load-bearing walls, partition walls and shafts);
  4. Passages in external walls, doors and windows (balcony) are not subject to measurement;
  5. The area of ​​rooms with a sloping ceiling is measured in the part higher than 1.90 m, while the remaining part measured in accordance with the floor area is included in the auxiliary area;
  6. The results of area calculations are rounded to 0.1 m2 (one tenth of a square meter);
  7. The measurement results are corrected for the thickness of the partition walls;
  8. The area for individual rooms is calculated for the area designated by the axes of the partition walls surrounding the given room and the edges of the load-bearing walls;
  9. The areas under the partition walls are included in the area of ​​the premises;
  10. The areas behind the G-K development in bathrooms are included in the area of ​​the premises;
  11. The part of the dimensions behind the G-K development in bathrooms, available for measurement and difficult to verify in any other way, will be determined based on the design dimensions;
  12. The area under the stairs leading to the mezzanines is included in the area of ​​the premises;
  13. The area under the reinforced concrete stairs leading to the next floor of the premises is included and measured like rooms with a sloping ceiling;
  14. The area under the walls and load-bearing columns inside the premises and the area within the shafts are not included in the usable area of ​​the premises, while external areas not closed on all sides, accessible from a given premises (balconies, loggias, terraces, etc.) are measured on the inner sides of balustrades, walls and other separating elements.